Slime Tyre Sealant 237ml
- Varenummer
- 01-070-6010-0
Leveringstid:
Er ikke på lager, forudbestil nu
Due to high demand, this item is currently not available.
Touratech: 9 x on site in Germany: Certainly also in your area.
Products are often available at our branches, so come by or call: Touratech locations
Due to high demand, this item is currently not available.
Touratech: 9 x on site in Germany: Certainly also in your area.
Products are often available at our branches, so come by or call: Touratech locations
10,50 €
inkl. moms
High quality motorcycle accessories
for over 35 years - Made in Germany
5.500+
products in our range
MOTORRAD
BEST BRAND 2024
Kategorie:
Zubehör/Umbauten
Product Details
Slime Tyre Sealant seeks out and instantly seals tread area punctures up to 1/4" (6mm) using Fibro-Seal Technology. Use Slime Tyre Sealant with an air source to repair tyre punctures on cars, trucks, motorcycles and SUVs. Install Slime in the tyres of any off-highway vehicle and prevent flats before they occur.
- Instantly seals up to 1/4" (6mm) punctures
- Non-toxic, non-corrosive and non-hazardous
- Non-flammable
- Cleans up with water
- TPMS Safe
For repair use only
- TPMS safe
- Seals multiple punctures repeatedly
- Non-toxic
- Non-corrosive
- Non-flammable
- Non-aerosol
- Water soluble
TPMS COMPATIBILITY
In order for a tyre sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for proper functionality. A sensor must be functional after all three tests in order for the sealant to be endorsed by TPMS (Tire Pressure Monitoring Systems) manufacturers.
- Instantly seals up to 1/4" (6mm) punctures
- Non-toxic, non-corrosive and non-hazardous
- Non-flammable
- Cleans up with water
- TPMS Safe
For repair use only
- TPMS safe
- Seals multiple punctures repeatedly
- Non-toxic
- Non-corrosive
- Non-flammable
- Non-aerosol
- Water soluble
TPMS COMPATIBILITY
In order for a tyre sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for proper functionality. A sensor must be functional after all three tests in order for the sealant to be endorsed by TPMS (Tire Pressure Monitoring Systems) manufacturers.
Downloads
Der er i øjeblikket ingen downloads tilgængelige.
Specifikationer
Made for Adventure for more than 35 years
| Call us for advice | +49 (0) 7728 9279-0 |
| Varenummer | 01-070-6010-0 |
|---|---|
| Availability Signal | inden for 3 måneder |
